RVS Faq

most frequently asked questions. This page will continue to grow as more and more questions are brought to our attention. If you don't find your answer here, you can ask us via e-mail at rvs@rvs-tec.ca, or you can always call us toll free at 1-866-715-0480

RVS Technology™ works on a very different principle than oil additives. Unlike all of the oil additives, RVS Technology™ works directly on the surfaces that the oil lubricates, it does not change the properties of the oil itself; RVS simply uses the oil as a medium to get to the friction areas of the device that is being treated. It forms a new metal-ceramic surface, which has much better properties than the original metal surface: lower friction coefficient, smoother and more efficient operation. Most importantly, once the metal-ceramic surface is formed, it is there to stay. We guarantee that only one complete treatment is needed for 100,000kms (60,000 miles), depending on driving conditions, but in many cases the effects have lasted much longer. All of this means that unlike all of the oil additives on the market, you don't need to re-apply the RVS treatment to your vehicle at every oil change. RVS Technology™ does all that the rest can only promise, and it delivers results that you can see and feel, results that last a very long time, not just until the next oil change.

By treating your vehicle’s engine with RVS Technology™, you will restore the engine operation to near factory specifications. The older and more worn the engine is, the bigger the effect will be. By restoring engine compression and power, you are reducing harmful emissions produced, your engine operates much easier and more efficiently, and it saves you on gas too. You will notice these changes yourself, RVS Technology™ makes a big difference.

We have just started introducing the RVS Technology™ in North America in the beginning of 2004. The technology is by no means new, the possibility was discovered in the 1970's in Russia, and since then it has been researched and developed. The final product was ready for testing in the middle of the 1990's, and since then numerous tests have been conducted to prove just how effective the technology really is. You can read about these tests by clicking here. Some of these tests were long term, and the final RVS Technology™ product became first available to the public in Finland. RVS Technology™ products are currently made in and imported from Finland. However, there are plans in effect to begin production on Canadian soil, which would lower the price for the consumer, and create new jobs.

There are many reasons why. If cost is an issue to you, then RVS Technology™ will actually save you money! In the long run, you will save from gas economy, but most significantly, you could avoid a potential engine overhaul or replacement. This is especially true when time comes for your vehicle to pass emissions testing. In many cases, when the engine is guzzling gas because of wear and age, or when it's burning oil, there is a high chance that after simply treating your engine with RVS Technology™, your vehicle will pass emissions testing. This not only saves you from costly repair, but if you treat the engine preventatively, you will lower the emissions produced and help keep our air cleaner. Furthermore, once your engine is treated with the RVS Technology™, all of the good changes that have occurred won't "go away" after the next oil change, unlike with all of the oil additives that are being advertised out on the market.